/* copy.c -- core functions for copying files and directories
Copyright (C) 1989-2014 Free Software Foundation, Inc.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
/* Extracted from cp.c and librarified by Jim Meyering. */
#include <config.h>
#include <stdio.h>
#include <assert.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <selinux/selinux.h>
#if HAVE_HURD_H
# include <hurd.h>
#endif
#if HAVE_PRIV_H
# include <priv.h>
#endif
#include "system.h"
#include "acl.h"
#include "backupfile.h"
#include "buffer-lcm.h"
#include "canonicalize.h"
#include "copy.h"
#include "cp-hash.h"
#include "extent-scan.h"
#include "error.h"
#include "fadvise.h"
#include "fcntl--.h"
#include "fiemap.h"
#include "file-set.h"
#include "filemode.h"
#include "filenamecat.h"
#include "full-write.h"
#include "hash.h"
#include "hash-triple.h"
#include "ignore-value.h"
#include "ioblksize.h"
#include "quote.h"
#include "root-uid.h"
#include "same.h"
#include "savedir.h"
#include "stat-size.h"
#include "stat-time.h"
#include "utimecmp.h"
#include "utimens.h"
#include "write-any-file.h"
#include "areadlink.h"
#include "yesno.h"
#include "selinux.h"
#if USE_XATTR
# include <attr/error_context.h>
# include <attr/libattr.h>
# include <stdarg.h>
# include "verror.h"
#endif
#ifndef HAVE_FCHOWN
# define HAVE_FCHOWN false
# define fchown(fd, uid, gid) (-1)
#endif
#ifndef HAVE_LCHOWN
# define HAVE_LCHOWN false
# define lchown(name, uid, gid) chown (name, uid, gid)
#endif
#ifndef HAVE_MKFIFO
static int
rpl_mkfifo (char const *file, mode_t mode)
{
errno = ENOTSUP;
return -1;
}
# define mkfifo rpl_mkfifo
#endif
#ifndef USE_ACL
# define USE_ACL 0
#endif
#define SAME_OWNER(A, B) ((A).st_uid == (B).st_uid)
#define SAME_GROUP(A, B) ((A).st_gid == (B).st_gid)
#define SAME_OWNER_AND_GROUP(A, B) (SAME_OWNER (A, B) && SAME_GROUP (A, B))
/* LINK_FOLLOWS_SYMLINKS is tri-state; if it is -1, we don't know
how link() behaves, so assume we can't hardlink symlinks in that case. */
#if defined HAVE_LINKAT || ! LINK_FOLLOWS_SYMLINKS
# define CAN_HARDLINK_SYMLINKS 1
#else
# define CAN_HARDLINK_SYMLINKS 0
#endif
struct dir_list
{
struct dir_list *parent;
ino_t ino;
dev_t dev;
};
/* Initial size of the cp.dest_info hash table. */
#define DEST_INFO_INITIAL_CAPACITY 61
static bool copy_internal (char const *src_name, char const *dst_name,
bool new_dst, struct stat const *parent,
struct dir_list *ancestors,
const struct cp_options *x,
bool command_line_arg,
bool *first_dir_created_per_command_line_arg,
bool *copy_into_self,
bool *rename_succeeded);
static bool owner_failure_ok (struct cp_options const *x);
/* Pointers to the file names: they're used in the diagnostic that is issued
when we detect the user is trying to copy a directory into itself. */
static char const *top_level_src_name;
static char const *top_level_dst_name;
/* Set the timestamp of symlink, FILE, to TIMESPEC.
If this system lacks support for that, simply return 0. */
static inline int
utimens_symlink (char const *file, struct timespec const *timespec)
{
int err = lutimens (file, timespec);
/* When configuring on a system with new headers and libraries, and
running on one with a kernel that is old enough to lack the syscall,
utimensat fails with ENOSYS. Ignore that. */
if (err && errno == ENOSYS)
err = 0;
return err;
}
/* Copy the regular file open on SRC_FD/SRC_NAME to DST_FD/DST_NAME,
honoring the MAKE_HOLES setting and using the BUF_SIZE-byte buffer
BUF for temporary storage. Copy no more than MAX_N_READ bytes.
Return true upon successful completion;
print a diagnostic and return false upon error.
Note that for best results, BUF should be "well"-aligned.
BUF must have sizeof(uintptr_t)-1 bytes of additional space
beyond BUF[BUF_SIZE-1].
Set *LAST_WRITE_MADE_HOLE to true if the final operation on
DEST_FD introduced a hole. Set *TOTAL_N_READ to the number of
bytes read. */
static bool
sparse_copy (int src_fd, int dest_fd, char *buf, size_t buf_size,
bool make_holes,
char const *src_name, char const *dst_name,
uintmax_t max_n_read, off_t *total_n_read,
bool *last_write_made_hole)
{
*last_write_made_hole = false;
*total_n_read = 0;
while (max_n_read)
{
bool make_hole = false;
ssize_t n_read = read (src_fd, buf, MIN (max_n_read, buf_size));
if (n_read < 0)
{
if (errno == EINTR)
continue;
error (0, errno, _("error reading %s"), quote (src_name));
return false;
}
if (n_read == 0)
break;
max_n_read -= n_read;
*total_n_read += n_read;
if (make_holes)
{
/* Sentinel required by is_nul(). */
buf[n_read] = '\1';
#ifdef lint
typedef uintptr_t word;
/* Usually, buf[n_read] is not the byte just before a "word"
(aka uintptr_t) boundary. In that case, the word-oriented
test below (*wp++ == 0) would read some uninitialized bytes
after the sentinel. To avoid false-positive reports about
this condition (e.g., from a tool like valgrind), set the
remaining bytes -- to any value. */
memset (buf + n_read + 1, 0, sizeof (word) - 1);
#endif
if ((make_hole = is_nul (buf, n_read)))
{
if (lseek (dest_fd, n_read, SEEK_CUR) < 0)
{
error (0, errno, _("cannot lseek %s"), quote (dst_name));
return false;
}
}
}
if (!make_hole)
{
size_t n = n_read;
if (full_write (dest_fd, buf, n) != n)
{
error (0, errno, _("error writing %s"), quote (dst_name));
return false;
}
/* It is tempting to return early here upon a short read from a
regular file. That would save the final read syscall for each
file. Unfortunately that doesn't work for certain files in
/proc with linux kernels from at least 2.6.9 .. 2.6.29. */
}
*last_write_made_hole = make_hole;
}
return true;
}
/* Perform the O(1) btrfs clone operation, if possible.
Upon success, return 0. Otherwise, return -1 and set errno. */
static inline int
clone_file (int dest_fd, int src_fd)
{
#ifdef __linux__
# undef BTRFS_IOCTL_MAGIC
# define BTRFS_IOCTL_MAGIC 0x94
# undef BTRFS_IOC_CLONE
# define BTRFS_IOC_CLONE _IOW (BTRFS_IOCTL_MAGIC, 9, int)
return ioctl (dest_fd, BTRFS_IOC_CLONE, src_fd);
#else
(void) dest_fd;
(void) src_fd;
errno = ENOTSUP;
return -1;
#endif
}
/* Write N_BYTES zero bytes to file descriptor FD. Return true if successful.
Upon write failure, set errno and return false. */
static bool
write_zeros (int fd, uint64_t n_bytes)
{
static char *zeros;
static size_t nz = IO_BUFSIZE;
/* Attempt to use a relatively large calloc'd source buffer for
efficiency, but if that allocation fails, resort to a smaller
statically allocated one. */
if (zeros == NULL)
{
static char fallback[1024];
zeros = calloc (nz, 1);
if (zeros == NULL)
{
zeros = fallback;
nz = sizeof fallback;
}
}
while (n_bytes)
{
uint64_t n = MIN (nz, n_bytes);
if ((full_write (fd, zeros, n)) != n)
return false;
n_bytes -= n;
}
return true;
}
/* Perform an efficient extent copy, if possible. This avoids
the overhead of detecting holes in hole-introducing/preserving
copy, and thus makes copying sparse files much more efficient.
Upon a successful copy, return true. If the initial extent scan
fails, set *NORMAL_COPY_REQUIRED to true and return false.
Upon any other failure, set *NORMAL_COPY_REQUIRED to false and
return false. */
static bool
extent_copy (int src_fd, int dest_fd, char *buf, size_t buf_size,
off_t src_total_size, enum Sparse_type sparse_mode,
char const *src_name, char const *dst_name,
bool *require_normal_copy)
{
struct extent_scan scan;
off_t last_ext_start = 0;
uint64_t last_ext_len = 0;
/* Keep track of the output position.
We may need this at the end, for a final ftruncate. */
off_t dest_pos = 0;
extent_scan_init (src_fd, &scan);
*require_normal_copy = false;
bool wrote_hole_at_eof = true;
do
{
bool ok = extent_scan_read (&scan);
if (! ok)
{
if (scan.hit_final_extent)
break;
if (scan.initial_scan_failed)
{
*require_normal_copy = true;
return false;
}
error (0, errno, _("%s: failed to get extents info"),
quote (src_name));
return false;
}
unsigned int i;
bool empty_extent = false;
for (i = 0; i < scan.ei_count || empty_extent; i++)
{
off_t ext_start;
uint64_t ext_len;
uint64_t hole_size;
if (i < scan.ei_count)
{
ext_start = scan.ext_info[i].ext_logical;
ext_len = scan.ext_info[i].ext_length;
}
else /* empty extent at EOF. */
{
i--;
ext_start = last_ext_start + scan.ext_info[i].ext_length;
ext_len = 0;
}
hole_size = ext_start - last_ext_start - last_ext_len;
wrote_hole_at_eof = false;
if (hole_size)
{
if (lseek (src_fd, ext_start, SEEK_SET) < 0)
{
error (0, errno, _("cannot lseek %s"), quote (src_name));
fail:
extent_scan_free (&scan);
return false;
}
if ((empty_extent && sparse_mode == SPARSE_ALWAYS)
|| (!empty_extent && sparse_mode != SPARSE_NEVER))
{
if (lseek (dest_fd, ext_start, SEEK_SET) < 0)
{
error (0, errno, _("cannot lseek %s"), quote (dst_name));
goto fail;
}
wrote_hole_at_eof = true;
}
else
{
/* When not inducing holes and when there is a hole between
the end of the previous extent and the beginning of the
current one, write zeros to the destination file. */
off_t nzeros = hole_size;
if (empty_extent)
nzeros = MIN (src_total_size - dest_pos, hole_size);
if (! write_zeros (dest_fd, nzeros))
{
error (0, errno, _("%s: write failed"), quote (dst_name));
goto fail;
}
dest_pos = MIN (src_total_size, ext_start);
}
}
last_ext_start = ext_start;
/* Treat an unwritten but allocated extent much like a hole.
I.E. don't read, but don't convert to a hole in the destination,
unless SPARSE_ALWAYS. */
/* For now, do not treat FIEMAP_EXTENT_UNWRITTEN specially,
because that (in combination with no sync) would lead to data
loss at least on XFS and ext4 when using 2.6.39-rc3 kernels. */
if (0 && (scan.ext_info[i].ext_flags & FIEMAP_EXTENT_UNWRITTEN))
{
empty_extent = true;
last_ext_len = 0;
if (ext_len == 0) /* The last extent is empty and processed. */
empty_extent = false;
}
else
{
off_t n_read;
empty_extent = false;
last_ext_len = ext_len;
if ( ! sparse_copy (src_fd, dest_fd, buf, buf_size,
sparse_mode == SPARSE_ALWAYS,
src_name, dst_name, ext_len, &n_read,
&wrote_hole_at_eof))
goto fail;
dest_pos = ext_start + n_read;
}
/* If the file ends with unwritten extents not accounted for in the
size, then skip processing them, and the associated redundant
read() calls which will always return 0. We will need to
remove this when we add fallocate() so that we can maintain
extents beyond the apparent size. */
if (dest_pos == src_total_size)
{
scan.hit_final_extent = true;
break;
}
}
/* Release the space allocated to scan->ext_info. */
extent_scan_free (&scan);
}
while (! scan.hit_final_extent);
/* When the source file ends with a hole, we have to do a little more work,
since the above copied only up to and including the final extent.
In order to complete the copy, we may have to insert a hole or write
zeros in the destination corresponding to the source file's hole-at-EOF.
In addition, if the final extent was a block of zeros at EOF and we've
just converted them to a hole in the destination, we must call ftruncate
here in order to record the proper length in the destination. */
if ((dest_pos < src_total_size || wrote_hole_at_eof)
&& (sparse_mode != SPARSE_NEVER
? ftruncate (dest_fd, src_total_size)
: ! write_zeros (dest_fd, src_total_size - dest_pos)))
{
error (0, errno, _("failed to extend %s"), quote (dst_name));
return false;
}
return true;
}
/* FIXME: describe */
/* FIXME: rewrite this to use a hash table so we avoid the quadratic
performance hit that's probably noticeable only on trees deeper
than a few hundred levels. See use of active_dir_map in remove.c */
static bool _GL_ATTRIBUTE_PURE
is_ancestor (const struct stat *sb, const struct dir_list *ancestors)
{
while (ancestors != 0)
{
if (ancestors->ino == sb->st_ino && ancestors->dev == sb->st_dev)
return true;
ancestors = ancestors->parent;
}
return false;
}
static bool
errno_unsupported (int err)
{
return err == ENOTSUP || err == ENODATA;
}
#if USE_XATTR
static void
copy_attr_error (struct error_context *ctx _GL_UNUSED,
char const *fmt, ...)
{
if (!errno_unsupported (errno))
{
int err = errno;
va_list ap;
/* use verror module to print error message */
va_start (ap, fmt);
verror (0, err, fmt, ap);
va_end (ap);
}
}
static void
copy_attr_allerror (struct error_context *ctx _GL_UNUSED,
char const *fmt, ...)
{
int err = errno;
va_list ap;
/* use verror module to print error message */
va_start (ap, fmt);
verror (0, err, fmt, ap);
va_end (ap);
}
static char const *
copy_attr_quote (struct error_context *ctx _GL_UNUSED, char const *str)
{
return quote (str);
}
static void
copy_attr_free (struct error_context *ctx _GL_UNUSED,
char const *str _GL_UNUSED)
{
}
/* Exclude SELinux extended attributes that are otherwise handled,
and are problematic to copy again. Also honor attributes
configured for exclusion in /etc/xattr.conf.
FIXME: Should we handle POSIX ACLs similarly?
Return zero to skip. */
static int
check_selinux_attr (const char *name, struct error_context *ctx)
{
return STRNCMP_LIT (name, "security.selinux")
&& attr_copy_check_permissions (name, ctx);
}
/* If positive SRC_FD and DST_FD descriptors are passed,
then copy by fd, otherwise copy by name. */
static bool
copy_attr (char const *src_path, int src_fd,
char const *dst_path, int dst_fd, struct cp_options const *x)
{
int ret;
bool all_errors = (!x->data_copy_required || x->require_preserve_xattr);
bool some_errors = (!all_errors && !x->reduce_diagnostics);
bool selinux_done = (x->preserve_security_context || x->set_security_context);
struct error_context ctx =
{
.error = all_errors ? copy_attr_allerror : copy_attr_error,
.quote = copy_attr_quote,
.quote_free = copy_attr_free
};
if (0 <= src_fd && 0 <= dst_fd)
ret = attr_copy_fd (src_path, src_fd, dst_path, dst_fd,
selinux_done ? check_selinux_attr : NULL,
(all_errors || some_errors ? &ctx : NULL));
else
ret = attr_copy_file (src_path, dst_path,
selinux_done ? check_selinux_attr : NULL,
(all_errors || some_errors ? &ctx : NULL));
return ret == 0;
}
#else /* USE_XATTR */
static bool
copy_attr (char const *src_path _GL_UNUSED,
int src_fd _GL_UNUSED,
char const *dst_path _GL_UNUSED,
int dst_fd _GL_UNUSED,
struct cp_options const *x _GL_UNUSED)
{
return true;
}
#endif /* USE_XATTR */
/* Read the contents of the directory SRC_NAME_IN, and recursively
copy the contents to DST_NAME_IN. NEW_DST is true if
DST_NAME_IN is a directory that was created previously in the
recursion. SRC_SB and ANCESTORS describe SRC_NAME_IN.
Set *COPY_INTO_SELF if SRC_NAME_IN is a parent of
(or the same as) DST_NAME_IN; otherwise, clear it.
Propagate *FIRST_DIR_CREATED_PER_COMMAND_LINE_ARG from
caller to each invocation of copy_internal. Be careful to
pass the address of a temporary, and to update
*FIRST_DIR_CREATED_PER_COMMAND_LINE_ARG only upon completion.
Return true if successful. */
static bool
copy_dir (char const *src_name_in, char const *dst_name_in, bool new_dst,
const struct stat *src_sb, struct dir_list *ancestors,
const struct cp_options *x,
bool *first_dir_created_per_command_line_arg,
bool *copy_into_self)
{
char *name_space;
char *namep;
struct cp_options non_command_line_options = *x;
bool ok = true;
name_space = savedir (src_name_in, SAVEDIR_SORT_FASTREAD);
if (name_space == NULL)
{
/* This diagnostic is a bit vague because savedir can fail in
several different ways. */
error (0, errno, _("cannot access %s"), quote (src_name_in));
return false;
}
/* For cp's -H option, dereference command line arguments, but do not
dereference symlinks that are found via recursive traversal. */
if (x->dereference == DEREF_COMMAND_LINE_ARGUMENTS)
non_command_line_options.dereference = DEREF_NEVER;
bool new_first_dir_created = false;
namep = name_space;
while (*namep != '\0')
{
bool local_copy_into_self;
char *src_name = file_name_concat (src_name_in, namep, NULL);
char *dst_name = file_name_concat (dst_name_in, namep, NULL);
bool first_dir_created = *first_dir_created_per_command_line_arg;
ok &= copy_internal (src_name, dst_name, new_dst, src_sb,
ancestors, &non_command_line_options, false,
&first_dir_created,
&local_copy_into_self, NULL);
*copy_into_self |= local_copy_into_self;
free (dst_name);
free (src_name);
/* If we're copying into self, there's no point in continuing,
and in fact, that would even infloop, now that we record only
the first created directory per command line argument. */
if (local_copy_into_self)
break;
new_first_dir_created |= first_dir_created;
namep += strlen (namep) + 1;
}
free (name_space);
*first_dir_created_per_command_line_arg = new_first_dir_created;
return ok;
}
/* Set the owner and owning group of DEST_DESC to the st_uid and
st_gid fields of SRC_SB. If DEST_DESC is undefined (-1), set
the owner and owning group of DST_NAME instead; for
safety prefer lchown if the system supports it since no
symbolic links should be involved. DEST_DESC must
refer to the same file as DEST_NAME if defined.
Upon failure to set both UID and GID, try to set only the GID.
NEW_DST is true if the file was newly created; otherwise,
DST_SB is the status of the destination.
Return 1 if the initial syscall succeeds, 0 if it fails but it's OK
not to preserve ownership, -1 otherwise. */
static int
set_owner (const struct cp_options *x, char const *dst_name, int dest_desc,
struct stat const *src_sb, bool new_dst,
struct stat const *dst_sb)
{
uid_t uid = src_sb->st_uid;
gid_t gid = src_sb->st_gid;
/* Naively changing the ownership of an already-existing file before
changing its permissions would create a window of vulnerability if
the file's old permissions are too generous for the new owner and
group. Avoid the window by first changing to a restrictive
temporary mode if necessary. */
if (!new_dst && (x->preserve_mode || x->move_mode || x->set_mode))
{
mode_t old_mode = dst_sb->st_mode;
mode_t new_mode =
(x->preserve_mode || x->move_mode ? src_sb->st_mode : x->mode);
mode_t restrictive_temp_mode = old_mode & new_mode & S_IRWXU;
if ((USE_ACL
|| (old_mode & CHMOD_MODE_BITS
& (~new_mode | S_ISUID | S_ISGID | S_ISVTX)))
&& qset_acl (dst_name, dest_desc, restrictive_temp_mode) != 0)
{
if (! owner_failure_ok (x))
error (0, errno, _("clearing permissions for %s"),
quote (dst_name));
return -x->require_preserve;
}
}
if (HAVE_FCHOWN && dest_desc != -1)
{
if (fchown (dest_desc, uid, gid) == 0)
return 1;
if (errno == EPERM || errno == EINVAL)
{
/* We've failed to set *both*. Now, try to set just the group
ID, but ignore any failure here, and don't change errno. */
int saved_errno = errno;
ignore_value (fchown (dest_desc, -1, gid));
errno = saved_errno;
}
}
else
{
if (lchown (dst_name, uid, gid) == 0)
return 1;
if (errno == EPERM || errno == EINVAL)
{
/* We've failed to set *both*. Now, try to set just the group
ID, but ignore any failure here, and don't change errno. */
int saved_errno = errno;
ignore_value (lchown (dst_name, -1, gid));
errno = saved_errno;
}
}
if (! chown_failure_ok (x))
{
error (0, errno, _("failed to preserve ownership for %s"),
quote (dst_name));
if (x->require_preserve)
return -1;
}
return 0;
}
/* Set the st_author field of DEST_DESC to the st_author field of
SRC_SB. If DEST_DESC is undefined (-1), set the st_author field
of DST_NAME instead. DEST_DESC must refer to the same file as
DEST_NAME if defined. */
static void
set_author (const char *dst_name, int dest_desc, const struct stat *src_sb)
{
#if HAVE_STRUCT_STAT_ST_AUTHOR
/* FIXME: Modify the following code so that it does not
follow symbolic links. */
/* Preserve the st_author field. */
file_t file = (dest_desc < 0
? file_name_lookup (dst_name, 0, 0)
: getdport (dest_desc));
if (file == MACH_PORT_NULL)
error (0, errno, _("failed to lookup file %s"), quote (dst_name));
else
{
error_t err = file_chauthor (file, src_sb->st_author);
if (err)
error (0, err, _("failed to preserve authorship for %s"),
quote (dst_name));
mach_port_deallocate (mach_task_self (), file);
}
#else
(void) dst_name;
(void) dest_desc;
(void) src_sb;
#endif
}
/* Set the default security context for the process. New files will
have this security context set. Also existing files can have their
context adjusted based on this process context, by
set_file_security_ctx() called with PROCESS_LOCAL=true.
This should be called before files are created so there is no race
where a file may be present without an appropriate security context.
Based on CP_OPTIONS, diagnose warnings and fail when appropriate.
Return FALSE on failure, TRUE on success. */
static bool
set_process_security_ctx (char const *src_name, char const *dst_name,
mode_t mode, bool new_dst, const struct cp_options *x)
{
if (x->preserve_security_context)
{
/* Set the default context for the process to match the source. */
bool all_errors = !x->data_copy_required || x->require_preserve_context;
bool some_errors = !all_errors && !x->reduce_diagnostics;
char *con;
if (0 <= lgetfilecon (src_name, &con))
{
if (setfscreatecon (con) < 0)
{
if (all_errors || (some_errors && !errno_unsupported (errno)))
error (0, errno,
_("failed to set default file creation context to %s"),
quote (con));
if (x->require_preserve_context)
{
freecon (con);
return false;
}
}
freecon (con);
}
else
{
if (all_errors || (some_errors && !errno_unsupported (errno)))
{
error (0, errno,
_("failed to get security context of %s"),
quote (src_name));
}
if (x->require_preserve_context)
return false;
}
}
else if (x->set_security_context)
{
/* With -Z, adjust the default context for the process
to have the type component adjusted as per the destination path. */
if (new_dst && defaultcon (dst_name, mode) < 0
&& ! ignorable_ctx_err (errno))
{
error (0, errno,
_("failed to set default file creation context for %s"),
quote (dst_name));
}
}
return true;
}
/* Reset the security context of DST_NAME, to that already set
as the process default if PROCESS_LOCAL is true. Otherwise
adjust the type component of DST_NAME's security context as
per the system default for that path. Issue warnings upon
failure, when allowed by various settings in CP_OPTIONS.
Return FALSE on failure, TRUE on success. */
static bool
set_file_security_ctx (char const *dst_name, bool process_local,
bool recurse, const struct cp_options *x)
{
bool all_errors = (!x->data_copy_required
|| x->require_preserve_context);
bool some_errors = !all_errors && !x->reduce_diagnostics;
if (! restorecon (dst_name, recurse, process_local))
{
if (all_errors || (some_errors && !errno_unsupported (errno)))
error (0, errno, _("failed to set the security context of %s"),
quote_n (0, dst_name));
return false;
}
return true;
}
/* Change the file mode bits of the file identified by DESC or NAME to MODE.
Use DESC if DESC is valid and fchmod is available, NAME otherwise. */
static int
fchmod_or_lchmod (int desc, char const *name, mode_t mode)
{
#if HAVE_FCHMOD
if (0 <= desc)
return fchmod (desc, mode);
#endif
return lchmod (name, mode);
}
#ifndef HAVE_STRUCT_STAT_ST_BLOCKS
# define HAVE_STRUCT_STAT_ST_BLOCKS 0
#endif
/* Use a heuristic to determine whether stat buffer SB comes from a file
with sparse blocks. If the file has fewer blocks than would normally
be needed for a file of its size, then at least one of the blocks in
the file is a hole. In that case, return true. */
static bool
is_probably_sparse (struct stat const *sb)
{
return (HAVE_STRUCT_STAT_ST_BLOCKS
&& S_ISREG (sb->st_mode)
&& ST_NBLOCKS (*sb) < sb->st_size / ST_NBLOCKSIZE);
}
/* Copy a regular file from SRC_NAME to DST_NAME.
If the source file contains holes, copies holes and blocks of zeros
in the source file as holes in the destination file.
(Holes are read as zeroes by the 'read' system call.)
When creating the destination, use DST_MODE & ~OMITTED_PERMISSIONS
as the third argument in the call to open, adding
OMITTED_PERMISSIONS after copying as needed.
X provides many option settings.
Return true if successful.
*NEW_DST is as in copy_internal.
SRC_SB is the result of calling XSTAT (aka stat) on SRC_NAME. */
static bool
copy_reg (char const *src_name, char const *dst_name,
const struct cp_options *x,
mode_t dst_mode, mode_t omitted_permissions, bool *new_dst,
struct stat const *src_sb)
{
char *buf;
char *buf_alloc = NULL;
char *name_alloc = NULL;
int dest_desc;
int dest_errno;
int source_desc;
mode_t src_mode = src_sb->st_mode;
struct stat sb;
struct stat src_open_sb;
bool return_val = true;
bool data_copy_required = x->data_copy_required;
source_desc = open (src_name,
(O_RDONLY | O_BINARY
| (x->dereference == DEREF_NEVER ? O_NOFOLLOW : 0)));
if (source_desc < 0)
{
error (0, errno, _("cannot open %s for reading"), quote (src_name));
return false;
}
if (fstat (source_desc, &src_open_sb) != 0)
{
error (0, errno, _("cannot fstat %s"), quote (src_name));
return_val = false;
goto close_src_desc;
}
/* Compare the source dev/ino from the open file to the incoming,
saved ones obtained via a previous call to stat. */
if (! SAME_INODE (*src_sb, src_open_sb))
{
error (0, 0,
_("skipping file %s, as it was replaced while being copied"),
quote (src_name));
return_val = false;
goto close_src_desc;
}
/* The semantics of the following open calls are mandated
by the specs for both cp and mv. */
if (! *new_dst)
{
int open_flags =
O_WRONLY | O_BINARY | (x->data_copy_required ? O_TRUNC : 0);
dest_desc = open (dst_name, open_flags);
dest_errno = errno;
/* When using cp --preserve=context to copy to an existing destination,
reset the context as per the default context, which has already been
set according to the src.
When using the mutually exclusive -Z option, then adjust the type of
the existing context according to the system default for the dest.
Note we set the context here, _after_ the file is opened, lest the
new context disallow that. */
if ((x->set_security_context || x->preserve_security_context)
&& 0 <= dest_desc)
{
if (! set_file_security_ctx (dst_name, x->preserve_security_context,
false, x))
{
if (x->require_preserve_context)
{
return_val = false;
goto close_src_and_dst_desc;
}
}
}
if (dest_desc < 0 && x->unlink_dest_after_failed_open)
{
if (unlink (dst_name) != 0)
{
error (0, errno, _("cannot remove %s"), quote (dst_name));
return_val = false;
goto close_src_desc;
}
if (x->verbose)
printf (_("removed %s\n"), quote (dst_name));
/* Tell caller that the destination file was unlinked. */
*new_dst = true;
/* Ensure there is no race where a file may be left without
an appropriate security context. */
if (x->set_security_context)
{
if (! set_process_security_ctx (src_name, dst_name, dst_mode,
*new_dst, x))
{
return_val = false;
goto close_src_desc;
}
}
}
}
if (*new_dst)
{
open_with_O_CREAT:;
int open_flags = O_WRONLY | O_CREAT | O_BINARY;
dest_desc = open (dst_name, open_flags | O_EXCL,
dst_mode & ~omitted_permissions);
dest_errno = errno;
/* When trying to copy through a dangling destination symlink,
the above open fails with EEXIST. If that happens, and
lstat'ing the DST_NAME shows that it is a symlink, then we
have a problem: trying to resolve this dangling symlink to
a directory/destination-entry pair is fundamentally racy,
so punt. If x->open_dangling_dest_symlink is set (cp sets
that when POSIXLY_CORRECT is set in the environment), simply
call open again, but without O_EXCL (potentially dangerous).
If not, fail with a diagnostic. These shenanigans are necessary
only when copying, i.e., not in move_mode. */
if (dest_desc < 0 && dest_errno == EEXIST && ! x->move_mode)
{
struct stat dangling_link_sb;
if (lstat (dst_name, &dangling_link_sb) == 0
&& S_ISLNK (dangling_link_sb.st_mode))
{
if (x->open_dangling_dest_symlink)
{
dest_desc = open (dst_name, open_flags,
dst_mode & ~omitted_permissions);
dest_errno = errno;
}
else
{
error (0, 0, _("not writing through dangling symlink %s"),
quote (dst_name));
return_val = false;
goto close_src_desc;
}
}
}
/* Improve quality of diagnostic when a nonexistent dst_name
ends in a slash and open fails with errno == EISDIR. */
if (dest_desc < 0 && dest_errno == EISDIR
&& *dst_name && dst_name[strlen (dst_name) - 1] == '/')
dest_errno = ENOTDIR;
}
else
{
omitted_permissions = 0;
}
if (dest_desc < 0)
{
/* If we've just failed due to ENOENT for an ostensibly preexisting
destination (*new_dst was 0), that's a bit of a contradiction/race:
the prior stat/lstat said the file existed (*new_dst was 0), yet
the subsequent open-existing-file failed with ENOENT. With NFS,
the race window is wider still, since its meta-data caching tends
to make the stat succeed for a just-removed remote file, while the
more-definitive initial open call will fail with ENOENT. When this
situation arises, we attempt to open again, but this time with
O_CREAT. Do this only when not in move-mode, since when handling
a cross-device move, we must never open an existing destination. */
if (dest_errno == ENOENT && ! *new_dst && ! x->move_mode)
{
*new_dst = 1;
goto open_with_O_CREAT;
}
/* Otherwise, it's an error. */
error (0, dest_errno, _("cannot create regular file %s"),
quote (dst_name));
return_val = false;
goto close_src_desc;
}
if (fstat (dest_desc, &sb) != 0)
{
error (0, errno, _("cannot fstat %s"), quote (dst_name));
return_val = false;
goto close_src_and_dst_desc;
}
/* --attributes-only overrides --reflink. */
if (data_copy_required && x->reflink_mode)
{
bool clone_ok = clone_file (dest_desc, source_desc) == 0;
if (clone_ok || x->reflink_mode == REFLINK_ALWAYS)
{
if (!clone_ok)
{
error (0, errno, _("failed to clone %s from %s"),
quote_n (0, dst_name), quote_n (1, src_name));
return_val = false;
goto close_src_and_dst_desc;
}
data_copy_required = false;
}
}
if (data_copy_required)
{
typedef uintptr_t word;
/* Choose a suitable buffer size; it may be adjusted later. */
size_t buf_alignment = lcm (getpagesize (), sizeof (word));
size_t buf_alignment_slop = sizeof (word) + buf_alignment - 1;
size_t buf_size = io_blksize (sb);
fdadvise (source_desc, 0, 0, FADVISE_SEQUENTIAL);
/* Deal with sparse files. */
bool make_holes = false;
bool sparse_src = false;
if (S_ISREG (sb.st_mode))
{
/* Even with --sparse=always, try to create holes only
if the destination is a regular file. */
if (x->sparse_mode == SPARSE_ALWAYS)
make_holes = true;
/* Use a heuristic to determine whether SRC_NAME contains any sparse
blocks. If the file has fewer blocks than would normally be
needed for a file of its size, then at least one of the blocks in
the file is a hole. */
sparse_src = is_probably_sparse (&src_open_sb);
if (x->sparse_mode == SPARSE_AUTO && sparse_src)
make_holes = true;
}
/* If not making a sparse file, try to use a more-efficient
buffer size. */
if (! make_holes)
{
/* Compute the least common multiple of the input and output
buffer sizes, adjusting for outlandish values. */
size_t blcm_max = MIN (SIZE_MAX, SSIZE_MAX) - buf_alignment_slop;
size_t blcm = buffer_lcm (io_blksize (src_open_sb), buf_size,
blcm_max);
/* Do not bother with a buffer larger than the input file, plus one
byte to make sure the file has not grown while reading it. */
if (S_ISREG (src_open_sb.st_mode) && src_open_sb.st_size < buf_size)
buf_size = src_open_sb.st_size + 1;
/* However, stick with a block size that is a positive multiple of
blcm, overriding the above adjustments. Watch out for
overflow. */
buf_size += blcm - 1;
buf_size -= buf_size % blcm;
if (buf_size == 0 || blcm_max < buf_size)
buf_size = blcm;
}
/* Make a buffer with space for a sentinel at the end. */
buf_alloc = xmalloc (buf_size + buf_alignment_slop);
buf = ptr_align (buf_alloc, buf_alignment);
if (sparse_src)
{
bool normal_copy_required;
/* Perform an efficient extent-based copy, falling back to the
standard copy only if the initial extent scan fails. If the
'--sparse=never' option is specified, write all data but use
any extents to read more efficiently. */
if (extent_copy (source_desc, dest_desc, buf, buf_size,
src_open_sb.st_size,
S_ISREG (sb.st_mode) ? x->sparse_mode : SPARSE_NEVER,
src_name, dst_name, &normal_copy_required))
goto preserve_metadata;
if (! normal_copy_required)
{
return_val = false;
goto close_src_and_dst_desc;
}
}
off_t n_read;
bool wrote_hole_at_eof;
if ( ! sparse_copy (source_desc, dest_desc, buf, buf_size,
make_holes, src_name, dst_name,
UINTMAX_MAX, &n_read,
&wrote_hole_at_eof)
|| (wrote_hole_at_eof
&& ftruncate (dest_desc, n_read) < 0))
{
error (0, errno, _("failed to extend %s"), quote (dst_name));
return_val = false;
goto close_src_and_dst_desc;
}
}
preserve_metadata:
if (x->preserve_timestamps)
{
struct timespec timespec[2];
timespec[0] = get_stat_atime (src_sb);
timespec[1] = get_stat_mtime (src_sb);
if (fdutimens (dest_desc, dst_name, timespec) != 0)
{
error (0, errno, _("preserving times for %s"), quote (dst_name));
if (x->require_preserve)
{
return_val = false;
goto close_src_and_dst_desc;
}
}
}
/* Set ownership before xattrs as changing owners will
clear capabilities. */
if (x->preserve_ownership && ! SAME_OWNER_AND_GROUP (*src_sb, sb))
{
switch (set_owner (x, dst_name, dest_desc, src_sb, *new_dst, &sb))
{
case -1:
return_val = false;
goto close_src_and_dst_desc;
case 0:
src_mode &= ~ (S_ISUID | S_ISGID | S_ISVTX);
break;
}
}
/* To allow copying xattrs on read-only files, temporarily chmod u+rw.
This workaround is required as an inode permission check is done
by xattr_permission() in fs/xattr.c of the GNU/Linux kernel tree. */
if (x->preserve_xattr)
{
bool access_changed = false;
if (!(sb.st_mode & S_IWUSR) && geteuid () != ROOT_UID)
access_changed = fchmod_or_lchmod (dest_desc, dst_name, 0600) == 0;
if (!copy_attr (src_name, source_desc, dst_name, dest_desc, x)
&& x->require_preserve_xattr)
return_val = false;
if (access_changed)
fchmod_or_lchmod (dest_desc, dst_name, dst_mode & ~omitted_permissions);
}
set_author (dst_name, dest_desc, src_sb);
if (x->preserve_mode || x->move_mode)
{
if (copy_acl (src_name, source_desc, dst_name, dest_desc, src_mode) != 0
&& x->require_preserve)
return_val = false;
}
else if (x->set_mode)
{
if (set_acl (dst_name, dest_desc, x->mode) != 0)
return_val = false;
}
else if (x->explicit_no_preserve_mode)
{
if (set_acl (dst_name, dest_desc, 0666 & ~cached_umask ()) != 0)
return_val = false;
}
else if (omitted_permissions)
{
omitted_permissions &= ~ cached_umask ();
if (omitted_permissions
&& fchmod_or_lchmod (dest_desc, dst_name, dst_mode) != 0)
{
error (0, errno, _("preserving permissions for %s"),
quote (dst_name));
if (x->require_preserve)
return_val = false;
}
}
close_src_and_dst_desc:
if (close (dest_desc) < 0)
{
error (0, errno, _("failed to close %s"), quote (dst_name));
return_val = false;
}
close_src_desc:
if (close (source_desc) < 0)
{
error (0, errno, _("failed to close %s"), quote (src_name));
return_val = false;
}
free (buf_alloc);
free (name_alloc);
return return_val;
}
/* Return true if it's ok that the source and destination
files are the 'same' by some measure. The goal is to avoid
making the 'copy' operation remove both copies of the file
in that case, while still allowing the user to e.g., move or
copy a regular file onto a symlink that points to it.
Try to minimize the cost of this function in the common case.
Set *RETURN_NOW if we've determined that the caller has no more
work to do and should return successfully, right away.
Set *UNLINK_SRC if we've determined that the caller wants to do
'rename (a, b)' where 'a' and 'b' are distinct hard links to the same
file. In that case, the caller should try to unlink 'a' and then return
successfully. Ideally, we wouldn't have to do that, and we'd be
able to rely on rename to remove the source file. However, POSIX
mistakenly requires that such a rename call do *nothing* and return
successfully. */
static bool
same_file_ok (char const *src_name, struct stat const *src_sb,
char const *dst_name, struct stat const *dst_sb,
const struct cp_options *x, bool *return_now, bool *unlink_src)
{
const struct stat *src_sb_link;
const struct stat *dst_sb_link;
struct stat tmp_dst_sb;
struct stat tmp_src_sb;
bool same_link;
bool same = SAME_INODE (*src_sb, *dst_sb);
*return_now = false;
*unlink_src = false;
/* FIXME: this should (at the very least) be moved into the following
if-block. More likely, it should be removed, because it inhibits
making backups. But removing it will result in a change in behavior
that will probably have to be documented -- and tests will have to
be updated. */
if (same && x->hard_link)
{
*return_now = true;
return true;
}
if (x->dereference == DEREF_NEVER)
{
same_link = same;
/* If both the source and destination files are symlinks (and we'll
know this here IFF preserving symlinks), then it's usually ok
when they are distinct. */
if (S_ISLNK (src_sb->st_mode) && S_ISLNK (dst_sb->st_mode))
{
bool sn = same_name (src_name, dst_name);
if ( ! sn)
{
/* It's fine when we're making any type of backup. */
if (x->backup_type != no_backups)
return true;
/* Here we have two symlinks that are hard-linked together,
and we're not making backups. In this unusual case, simply
returning true would lead to mv calling "rename(A,B)",
which would do nothing and return 0. I.e., A would
not be removed. Hence, the solution is to tell the
caller that all it must do is unlink A and return. */
if (same_link)
{
*unlink_src = true;
*return_now = true;
return true;
}
}
return ! sn;
}
src_sb_link = src_sb;
dst_sb_link = dst_sb;
}
else
{
if (!same)
return true;
if (lstat (dst_name, &tmp_dst_sb) != 0
|| lstat (src_name, &tmp_src_sb) != 0)
return true;
src_sb_link = &tmp_src_sb;
dst_sb_link = &tmp_dst_sb;
same_link = SAME_INODE (*src_sb_link, *dst_sb_link);
/* If both are symlinks, then it's ok, but only if the destination
will be unlinked before being opened. This is like the test
above, but with the addition of the unlink_dest_before_opening
conjunct because otherwise, with two symlinks to the same target,
we'd end up truncating the source file. */
if (S_ISLNK (src_sb_link->st_mode) && S_ISLNK (dst_sb_link->st_mode)
&& x->unlink_dest_before_opening)
return true;
}
/* The backup code ensures there's a copy, so it's usually ok to
remove any destination file. One exception is when both
source and destination are the same directory entry. In that
case, moving the destination file aside (in making the backup)
would also rename the source file and result in an error. */
if (x->backup_type != no_backups)
{
if (!same_link)
{
/* In copy mode when dereferencing symlinks, if the source is a
symlink and the dest is not, then backing up the destination
(moving it aside) would make it a dangling symlink, and the
subsequent attempt to open it in copy_reg would fail with
a misleading diagnostic. Avoid that by returning zero in
that case so the caller can make cp (or mv when it has to
resort to reading the source file) fail now. */
/* FIXME-note: even with the following kludge, we can still provoke
the offending diagnostic. It's just a little harder to do :-)
$ rm -f a b c; touch c; ln -s c b; ln -s b a; cp -b a b
cp: cannot open 'a' for reading: No such file or directory
That's misleading, since a subsequent 'ls' shows that 'a'
is still there.
One solution would be to open the source file *before* moving
aside the destination, but that'd involve a big rewrite. */
if ( ! x->move_mode
&& x->dereference != DEREF_NEVER
&& S_ISLNK (src_sb_link->st_mode)
&& ! S_ISLNK (dst_sb_link->st_mode))
return false;
return true;
}
return ! same_name (src_name, dst_name);
}
#if 0
/* FIXME: use or remove */
/* If we're making a backup, we'll detect the problem case in
copy_reg because SRC_NAME will no longer exist. Allowing
the test to be deferred lets cp do some useful things.
But when creating hardlinks and SRC_NAME is a symlink
but DST_NAME is not we must test anyway. */
if (x->hard_link
|| !S_ISLNK (src_sb_link->st_mode)
|| S_ISLNK (dst_sb_link->st_mode))
return true;
if (x->dereference != DEREF_NEVER)
return true;
#endif
/* They may refer to the same file if we're in move mode and the
target is a symlink. That is ok, since we remove any existing
destination file before opening it -- via 'rename' if they're on
the same file system, via 'unlink (DST_NAME)' otherwise.
It's also ok if they're distinct hard links to the same file. */
if (x->move_mode || x->unlink_dest_before_opening)
{
if (S_ISLNK (dst_sb_link->st_mode))
return true;
if (same_link
&& 1 < dst_sb_link->st_nlink
&& ! same_name (src_name, dst_name))
{
if (x->move_mode)
{
*unlink_src = true;
*return_now = true;
}
return true;
}
}
/* If neither is a symlink, then it's ok as long as they aren't
hard links to the same file. */
if (!S_ISLNK (src_sb_link->st_mode) && !S_ISLNK (dst_sb_link->st_mode))
{
if (!SAME_INODE (*src_sb_link, *dst_sb_link))
return true;
/* If they are the same file, it's ok if we're making hard links. */
if (x->hard_link)
{
*return_now = true;
return true;
}
}
/* At this point, it is normally an error (data loss) to move a symlink
onto its referent, but in at least one narrow case, it is not:
In move mode, when
1) src is a symlink,
2) dest has a link count of 2 or more and
3) dest and the referent of src are not the same directory entry,
then it's ok, since while we'll lose one of those hard links,
src will still point to a remaining link.
Note that technically, condition #3 obviates condition #2, but we
retain the 1 < st_nlink condition because that means fewer invocations
of the more expensive #3.
Given this,
$ touch f && ln f l && ln -s f s
$ ls -og f l s
-rw-------. 2 0 Jan 4 22:46 f
-rw-------. 2 0 Jan 4 22:46 l
lrwxrwxrwx. 1 1 Jan 4 22:46 s -> f
this must fail: mv s f
this must succeed: mv s l */
if (x->move_mode
&& S_ISLNK (src_sb->st_mode)
&& 1 < dst_sb_link->st_nlink)
{
char *abs_src = canonicalize_file_name (src_name);
if (abs_src)
{
bool result = ! same_name (abs_src, dst_name);
free (abs_src);
return result;
}
}
/* It's ok to remove a destination symlink. But that works only when we
unlink before opening the destination and when the source and destination
files are on the same partition. */
if (x->unlink_dest_before_opening
&& S_ISLNK (dst_sb_link->st_mode))
return dst_sb_link->st_dev == src_sb_link->st_dev;
if (x->dereference == DEREF_NEVER)
{
if ( ! S_ISLNK (src_sb_link->st_mode))
tmp_src_sb = *src_sb_link;
else if (stat (src_name, &tmp_src_sb) != 0)
return true;
if ( ! S_ISLNK (dst_sb_link->st_mode))
tmp_dst_sb = *dst_sb_link;
else if (stat (dst_name, &tmp_dst_sb) != 0)
return true;
if ( ! SAME_INODE (tmp_src_sb, tmp_dst_sb))
return true;
/* FIXME: shouldn't this be testing whether we're making symlinks? */
if (x->hard_link)
{
*return_now = true;
return true;
}
}
return false;
}
/* Return true if FILE, with mode MODE, is writable in the sense of 'mv'.
Always consider a symbolic link to be writable. */
static bool
writable_destination (char const *file, mode_t mode)
{
return (S_ISLNK (mode)
|| can_write_any_file ()
|| euidaccess (file, W_OK) == 0);
}
static bool
overwrite_ok (struct cp_options const *x, char const *dst_name,
struct stat const *dst_sb)
{
if (! writable_destination (dst_name, dst_sb->st_mode))
{
char perms[12]; /* "-rwxrwxrwx " ls-style modes. */
strmode (dst_sb->st_mode, perms);
perms[10] = '\0';
fprintf (stderr,
(x->move_mode || x->unlink_dest_before_opening
|| x->unlink_dest_after_failed_open)
? _("%s: replace %s, overriding mode %04lo (%s)? ")
: _("%s: unwritable %s (mode %04lo, %s); try anyway? "),
program_name, quote (dst_name),
(unsigned long int) (dst_sb->st_mode & CHMOD_MODE_BITS),
&perms[1]);
}
else
{
fprintf (stderr, _("%s: overwrite %s? "),
program_name, quote (dst_name));
}
return yesno ();
}
/* Initialize the hash table implementing a set of F_triple entries
corresponding to destination files. */
extern void
dest_info_init (struct cp_options *x)
{
x->dest_info
= hash_initialize (DEST_INFO_INITIAL_CAPACITY,
NULL,
triple_hash,
triple_compare,
triple_free);
}
/* Initialize the hash table implementing a set of F_triple entries
corresponding to source files listed on the command line. */
extern void
src_info_init (struct cp_options *x)
{
/* Note that we use triple_hash_no_name here.
Contrast with the use of triple_hash above.
That is necessary because a source file may be specified
in many different ways. We want to warn about this
cp a a d/
as well as this:
cp a ./a d/
*/
x->src_info
= hash_initialize (DEST_INFO_INITIAL_CAPACITY,
NULL,
triple_hash_no_name,
triple_compare,
triple_free);
}
/* When effecting a move (e.g., for mv(1)), and given the name DST_NAME
of the destination and a corresponding stat buffer, DST_SB, return
true if the logical 'move' operation should _not_ proceed.
Otherwise, return false.
Depending on options specified in X, this code may issue an
interactive prompt asking whether it's ok to overwrite DST_NAME. */
static bool
abandon_move (const struct cp_options *x,
char const *dst_name,
struct stat const *dst_sb)
{
assert (x->move_mode);
return (x->interactive == I_ALWAYS_NO
|| ((x->interactive == I_ASK_USER
|| (x->interactive == I_UNSPECIFIED
&& x->stdin_tty
&& ! writable_destination (dst_name, dst_sb->st_mode)))
&& ! overwrite_ok (x, dst_name, dst_sb)));
}
/* Print --verbose output on standard output, e.g. 'new' -> 'old'.
If BACKUP_DST_NAME is non-NULL, then also indicate that it is
the name of a backup file. */
static void
emit_verbose (char const *src, char const *dst, char const *backup_dst_name)
{
printf ("%s -> %s", quote_n (0, src), quote_n (1, dst));
if (backup_dst_name)
printf (_(" (backup: %s)"), quote (backup_dst_name));
putchar ('\n');
}
/* A wrapper around "setfscreatecon (NULL)" that exits upon failure. */
static void
restore_default_fscreatecon_or_die (void)
{
if (setfscreatecon (NULL) != 0)
error (EXIT_FAILURE, errno,
_("failed to restore the default file creation context"));
}
/* Create a hard link DST_NAME to SRC_NAME, honoring the REPLACE, VERBOSE and
DEREFERENCE settings. Return true upon success. Otherwise, diagnose the
failure and return false. If SRC_NAME is a symbolic link, then it will not
be followed unless DEREFERENCE is true.
If the system doesn't support hard links to symbolic links, then DST_NAME
will be created as a symbolic link to SRC_NAME. */
static bool
create_hard_link (char const *src_name, char const *dst_name,
bool replace, bool verbose, bool dereference)
{
/* We want to guarantee that symlinks are not followed, unless requested. */
int flags = 0;
if (dereference)
flags = AT_SYMLINK_FOLLOW;
bool link_failed = (linkat (AT_FDCWD, src_name, AT_FDCWD, dst_name, flags)
!= 0);
/* If the link failed because of an existing destination,
remove that file and then call link again. */
if (link_failed && replace && errno == EEXIST)
{
if (unlink (dst_name) != 0)
{
error (0, errno, _("cannot remove %s"), quote (dst_name));
return false;
}
if (verbose)
printf (_("removed %s\n"), quote (dst_name));
link_failed = (linkat (AT_FDCWD, src_name, AT_FDCWD, dst_name, flags)
!= 0);
}
if (link_failed)
{
error (0, errno, _("cannot create hard link %s to %s"),
quote_n (0, dst_name), quote_n (1, src_name));
return false;
}
return true;
}
/* Return true if the current file should be (tried to be) dereferenced:
either for DEREF_ALWAYS or for DEREF_COMMAND_LINE_ARGUMENTS in the case
where the current file is a COMMAND_LINE_ARG; otherwise return false. */
static inline bool _GL_ATTRIBUTE_PURE
should_dereference (const struct cp_options *x, bool command_line_arg)
{
return x->dereference == DEREF_ALWAYS
|| (x->dereference == DEREF_COMMAND_LINE_ARGUMENTS
&& command_line_arg);
}
/* Copy the file SRC_NAME to the file DST_NAME. The files may be of
any type. NEW_DST should be true if the file DST_NAME cannot
exist because its parent directory was just created; NEW_DST should
be false if DST_NAME might already exist. A nonnull PARENT describes the
parent directory. ANCESTORS points to a linked, null terminated list of
devices and inodes of parent directories of SRC_NAME. COMMAND_LINE_ARG
is true iff SRC_NAME was specified on the command line.
FIRST_DIR_CREATED_PER_COMMAND_LINE_ARG is both input and output.
Set *COPY_INTO_SELF if SRC_NAME is a parent of (or the
same as) DST_NAME; otherwise, clear it.
Return true if successful. */
static bool
copy_internal (char const *src_name, char const *dst_name,
bool new_dst,
struct stat const *parent,
struct dir_list *ancestors,
const struct cp_options *x,
bool command_line_arg,
bool *first_dir_created_per_command_line_arg,
bool *copy_into_self,
bool *rename_succeeded)
{
struct stat src_sb;
struct stat dst_sb;
mode_t src_mode;
mode_t dst_mode IF_LINT ( = 0);
mode_t dst_mode_bits;
mode_t omitted_permissions;
bool restore_dst_mode = false;
char *earlier_file = NULL;
char *dst_backup = NULL;
bool backup_succeeded = false;
bool delayed_ok;
bool copied_as_regular = false;
bool dest_is_symlink = false;
bool have_dst_lstat = false;
if (x->move_mode && rename_succeeded)
*rename_succeeded = false;
*copy_into_self = false;
if (XSTAT (x, src_name, &src_sb) != 0)
{
error (0, errno, _("cannot stat %s"), quote (src_name));
return false;
}
src_mode = src_sb.st_mode;
if (S_ISDIR (src_mode) && !x->recursive)
{
error (0, 0, _("omitting directory %s"), quote (src_name));
return false;
}
/* Detect the case in which the same source file appears more than
once on the command line and no backup option has been selected.
If so, simply warn and don't copy it the second time.
This check is enabled only if x->src_info is non-NULL. */
if (command_line_arg)
{
if ( ! S_ISDIR (src_sb.st_mode)
&& x->backup_type == no_backups
&& seen_file (x->src_info, src_name, &src_sb))
{
error (0, 0, _("warning: source file %s specified more than once"),
quote (src_name));
return true;
}
record_file (x->src_info, src_name, &src_sb);
}
bool dereference = should_dereference (x, command_line_arg);
if (!new_dst)
{
/* Regular files can be created by writing through symbolic
links, but other files cannot. So use stat on the
destination when copying a regular file, and lstat otherwise.
However, if we intend to unlink or remove the destination
first, use lstat, since a copy won't actually be made to the
destination in that case. */
bool use_stat =
((S_ISREG (src_mode)
|| (x->copy_as_regular
&& ! (S_ISDIR (src_mode) || S_ISLNK (src_mode))))
&& ! (x->move_mode || x->symbolic_link || x->hard_link
|| x->backup_type != no_backups
|| x->unlink_dest_before_opening));
if ((use_stat
? stat (dst_name, &dst_sb)
: lstat (dst_name, &dst_sb))
!= 0)
{
if (errno != ENOENT)
{
error (0, errno, _("cannot stat %s"), quote (dst_name));
return false;
}
else
{
new_dst = true;
}
}
else
{ /* Here, we know that dst_name exists, at least to the point
that it is stat'able or lstat'able. */
bool return_now;
bool unlink_src;
have_dst_lstat = !use_stat;
if (! same_file_ok (src_name, &src_sb, dst_name, &dst_sb,
x, &return_now, &unlink_src))
{
error (0, 0, _("%s and %s are the same file"),
quote_n (0, src_name), quote_n (1, dst_name));
return false;
}
if (!S_ISDIR (src_mode) && x->update)
{
/* When preserving time stamps (but not moving within a file
system), don't worry if the destination time stamp is
less than the source merely because of time stamp
truncation. */
int options = ((x->preserve_timestamps
&& ! (x->move_mode
&& dst_sb.st_dev == src_sb.st_dev))
? UTIMECMP_TRUNCATE_SOURCE
: 0);
if (0 <= utimecmp (dst_name, &dst_sb, &src_sb, options))
{
/* We're using --update and the destination is not older
than the source, so do not copy or move. Pretend the
rename succeeded, so the caller (if it's mv) doesn't
end up removing the source file. */
if (rename_succeeded)
*rename_succeeded = true;
/* However, we still must record that we've processed
this src/dest pair, in case this source file is
hard-linked to another one. In that case, we'll use
the mapping information to link the corresponding
destination names. */
earlier_file = remember_copied (dst_name, src_sb.st_ino,
src_sb.st_dev);
if (earlier_file)
{
/* Note we currently replace DST_NAME unconditionally,
even if it was a newer separate file. */
if (! create_hard_link (earlier_file, dst_name, true,
x->verbose, dereference))
{
goto un_backup;
}
}
return true;
}
}
/* When there is an existing destination file, we may end up
returning early, and hence not copying/moving the file.
This may be due to an interactive 'negative' reply to the
prompt about the existing file. It may also be due to the
use of the --no-clobber option.
cp and mv treat -i and -f differently. */
if (x->move_mode)
{
if (abandon_move (x, dst_name, &dst_sb)
|| (unlink_src && unlink (src_name) == 0))
{
/* Pretend the rename succeeded, so the caller (mv)
doesn't end up removing the source file. */
if (rename_succeeded)
*rename_succeeded = true;
if (unlink_src && x->verbose)
printf (_("removed %s\n"), quote (src_name));
return true;
}
if (unlink_src)
{
error (0, errno, _("cannot remove %s"), quote (src_name));
return false;
}
}
else
{
if (! S_ISDIR (src_mode)
&& (x->interactive == I_ALWAYS_NO
|| (x->interactive == I_ASK_USER
&& ! overwrite_ok (x, dst_name, &dst_sb))))
return true;
}
if (return_now)
return true;
if (!S_ISDIR (dst_sb.st_mode))
{
if (S_ISDIR (src_mode))
{
if (x->move_mode && x->backup_type != no_backups)
{
/* Moving a directory onto an existing
non-directory is ok only with --backup. */
}
else
{
error (0, 0,
_("cannot overwrite non-directory %s with directory %s"),
quote_n (0, dst_name), quote_n (1, src_name));
return false;
}
}
/* Don't let the user destroy their data, even if they try hard:
This mv command must fail (likewise for cp):
rm -rf a b c; mkdir a b c; touch a/f b/f; mv a/f b/f c
Otherwise, the contents of b/f would be lost.
In the case of 'cp', b/f would be lost if the user simulated
a move using cp and rm.
Note that it works fine if you use --backup=numbered. */
if (command_line_arg
&& x->backup_type != numbered_backups
&& seen_file (x->dest_info, dst_name, &dst_sb))
{
error (0, 0,
_("will not overwrite just-created %s with %s"),
quote_n (0, dst_name), quote_n (1, src_name));
return false;
}
}
if (!S_ISDIR (src_mode))
{
if (S_ISDIR (dst_sb.st_mode))
{
if (x->move_mode && x->backup_type != no_backups)
{
/* Moving a non-directory onto an existing
directory is ok only with --backup. */
}
else
{
error (0, 0,
_("cannot overwrite directory %s with non-directory"),
quote (dst_name));
return false;
}
}
}
if (x->move_mode)
{
/* Don't allow user to move a directory onto a non-directory. */
if (S_ISDIR (src_sb.st_mode) && !S_ISDIR (dst_sb.st_mode)
&& x->backup_type == no_backups)
{
error (0, 0,
_("cannot move directory onto non-directory: %s -> %s"),
quote_n (0, src_name), quote_n (0, dst_name));
return false;
}
}
if (x->backup_type != no_backups
/* Don't try to back up a destination if the last
component of src_name is "." or "..". */
&& ! dot_or_dotdot (last_component (src_name))
/* Create a backup of each destination directory in move mode,
but not in copy mode. FIXME: it might make sense to add an
option to suppress backup creation also for move mode.
That would let one use mv to merge new content into an
existing hierarchy. */
&& (x->move_mode || ! S_ISDIR (dst_sb.st_mode)))
{
char *tmp_backup = find_backup_file_name (dst_name,
x->backup_type);
/* Detect (and fail) when creating the backup file would
destroy the source file. Before, running the commands
cd /tmp; rm -f a a~; : > a; echo A > a~; cp --b=simple a~ a
would leave two zero-length files: a and a~. */
/* FIXME: but simply change e.g., the final a~ to './a~'
and the source will still be destroyed. */
if (STREQ (tmp_backup, src_name))
{
const char *fmt;
fmt = (x->move_mode
? _("backing up %s would destroy source; %s not moved")
: _("backing up %s would destroy source; %s not copied"));
error (0, 0, fmt,
quote_n (0, dst_name),
quote_n (1, src_name));
free (tmp_backup);
return false;
}
/* FIXME: use fts:
Using alloca for a file name that may be arbitrarily
long is not recommended. In fact, even forming such a name
should be discouraged. Eventually, this code will be rewritten
to use fts, so using alloca here will be less of a problem. */
ASSIGN_STRDUPA (dst_backup, tmp_backup);
free (tmp_backup);
/* In move mode, when src_name and dst_name are on the
same partition (FIXME, and when they are non-directories),
make the operation atomic: link dest
to backup, then rename src to dest. */
if (rename (dst_name, dst_backup) != 0)
{
if (errno != ENOENT)
{
error (0, errno, _("cannot backup %s"), quote (dst_name));
return false;
}
else
{
dst_backup = NULL;
}
}
else
{
backup_succeeded = true;
}
new_dst = true;
}
else if (! S_ISDIR (dst_sb.st_mode)
/* Never unlink dst_name when in move mode. */
&& ! x->move_mode
&& (x->unlink_dest_before_opening
|| (x->preserve_links && 1 < dst_sb.st_nlink)
|| (x->dereference == DEREF_NEVER
&& ! S_ISREG (src_sb.st_mode))
))
{
if (unlink (dst_name) != 0 && errno != ENOENT)
{
error (0, errno, _("cannot remove %s"), quote (dst_name));
return false;
}
new_dst = true;
if (x->verbose)
printf (_("removed %s\n"), quote (dst_name));
}
}
}
/* Ensure we don't try to copy through a symlink that was
created by a prior call to this function. */
if (command_line_arg
&& x->dest_info
&& ! x->move_mode
&& x->backup_type == no_backups)
{
bool lstat_ok = true;
struct stat tmp_buf;
struct stat *dst_lstat_sb;
/* If we called lstat above, good: use that data.
Otherwise, call lstat here, in case dst_name is a symlink. */
if (have_dst_lstat)
dst_lstat_sb = &dst_sb;
else
{
if (lstat (dst_name, &tmp_buf) == 0)
dst_lstat_sb = &tmp_buf;
else
lstat_ok = false;
}
/* Never copy through a symlink we've just created. */
if (lstat_ok
&& S_ISLNK (dst_lstat_sb->st_mode)
&& seen_file (x->dest_info, dst_name, dst_lstat_sb))
{
error (0, 0,
_("will not copy %s through just-created symlink %s"),
quote_n (0, src_name), quote_n (1, dst_name));
return false;
}
}
/* If the source is a directory, we don't always create the destination
directory. So --verbose should not announce anything until we're
sure we'll create a directory. */
if (x->verbose && !S_ISDIR (src_mode))
emit_verbose (src_name, dst_name, backup_succeeded ? dst_backup : NULL);
/* Associate the destination file name with the source device and inode
so that if we encounter a matching dev/ino pair in the source tree
we can arrange to create a hard link between the corresponding names
in the destination tree.
When using the --link (-l) option, there is no need to take special
measures, because (barring race conditions) files that are hard-linked
in the source tree will also be hard-linked in the destination tree.
Sometimes, when preserving links, we have to record dev/ino even
though st_nlink == 1:
- when in move_mode, since we may be moving a group of N hard-linked
files (via two or more command line arguments) to a different
partition; the links may be distributed among the command line
arguments (possibly hierarchies) so that the link count of
the final, once-linked source file is reduced to 1 when it is
considered below. But in this case (for mv) we don't need to
incur the expense of recording the dev/ino => name mapping; all we
really need is a lookup, to see if the dev/ino pair has already
been copied.
- when using -H and processing a command line argument;
that command line argument could be a symlink pointing to another
command line argument. With 'cp -H --preserve=link', we hard-link
those two destination files.
- likewise for -L except that it applies to all files, not just
command line arguments.
Also, with --recursive, record dev/ino of each command-line directory.
We'll use that info to detect this problem: cp -R dir dir. */
if (x->move_mode && src_sb.st_nlink == 1)
{
earlier_file = src_to_dest_lookup (src_sb.st_ino, src_sb.st_dev);
}
else if (x->preserve_links
&& !x->hard_link
&& (1 < src_sb.st_nlink
|| (command_line_arg
&& x->dereference == DEREF_COMMAND_LINE_ARGUMENTS)
|| x->dereference == DEREF_ALWAYS))
{
earlier_file = remember_copied (dst_name, src_sb.st_ino, src_sb.st_dev);
}
else if (x->recursive && S_ISDIR (src_mode))
{
if (command_line_arg)
earlier_file = remember_copied (dst_name, src_sb.st_ino, src_sb.st_dev);
else
earlier_file = src_to_dest_lookup (src_sb.st_ino, src_sb.st_dev);
}
/* Did we copy this inode somewhere else (in this command line argument)
and therefore this is a second hard link to the inode? */
if (earlier_file)
{
/* Avoid damaging the destination file system by refusing to preserve
hard-linked directories (which are found at least in Netapp snapshot
directories). */
if (S_ISDIR (src_mode))
{
/* If src_name and earlier_file refer to the same directory entry,
then warn about copying a directory into itself. */
if (same_name (src_name, earlier_file))
{
error (0, 0, _("cannot copy a directory, %s, into itself, %s"),
quote_n (0, top_level_src_name),
quote_n (1, top_level_dst_name));
*copy_into_self = true;
goto un_backup;
}
else if (x->dereference == DEREF_ALWAYS)
{
/* This happens when e.g., encountering a directory for the
second or subsequent time via symlinks when cp is invoked
with -R and -L. E.g.,
rm -rf a b c d; mkdir a b c d; ln -s ../c a; ln -s ../c b;
cp -RL a b d
*/
}
else
{
error (0, 0, _("will not create hard link %s to directory %s"),
quote_n (0, dst_name), quote_n (1, earlier_file));
goto un_backup;
}
}
else
{
if (! create_hard_link (earlier_file, dst_name, true, x->verbose,
dereference))
goto un_backup;
return true;
}
}
if (x->move_mode)
{
if (rename (src_name, dst_name) == 0)
{
if (x->verbose && S_ISDIR (src_mode))
emit_verbose (src_name, dst_name,
backup_succeeded ? dst_backup : NULL);
if (x->set_security_context)
{
/* -Z failures are only warnings currently. */
(void) set_file_security_ctx (dst_name, false, true, x);
}
if (rename_succeeded)
*rename_succeeded = true;
if (command_line_arg)
{
/* Record destination dev/ino/name, so that if we are asked
to overwrite that file again, we can detect it and fail. */
/* It's fine to use the _source_ stat buffer (src_sb) to get the
_destination_ dev/ino, since the rename above can't have
changed those, and 'mv' always uses lstat.
We could limit it further by operating
only on non-directories. */
record_file (x->dest_info, dst_name, &src_sb);
}
return true;
}
/* FIXME: someday, consider what to do when moving a directory into
itself but when source and destination are on different devices. */
/* This happens when attempting to rename a directory to a
subdirectory of itself. */
if (errno == EINVAL)
{
/* FIXME: this is a little fragile in that it relies on rename(2)
failing with a specific errno value. Expect problems on
non-POSIX systems. */
error (0, 0, _("cannot move %s to a subdirectory of itself, %s"),
quote_n (0, top_level_src_name),
quote_n (1, top_level_dst_name));
/* Note that there is no need to call forget_created here,
(compare with the other calls in this file) since the
destination directory didn't exist before. */
*copy_into_self = true;
/* FIXME-cleanup: Don't return true here; adjust mv.c accordingly.
The only caller that uses this code (mv.c) ends up setting its
exit status to nonzero when copy_into_self is nonzero. */
return true;
}
/* WARNING: there probably exist systems for which an inter-device
rename fails with a value of errno not handled here.
If/as those are reported, add them to the condition below.
If this happens to you, please do the following and send the output
to the bug-reporting address (e.g., in the output of cp --help):
touch k; perl -e 'rename "k","/tmp/k" or print "$!(",$!+0,")\n"'
where your current directory is on one partion and /tmp is the other.
Also, please try to find the E* errno macro name corresponding to
the diagnostic and parenthesized integer, and include that in your
e-mail. One way to do that is to run a command like this
find /usr/include/. -type f \
| xargs grep 'define.*\<E[A-Z]*\>.*\<18\>' /dev/null
where you'd replace '18' with the integer in parentheses that
was output from the perl one-liner above.
If necessary, of course, change '/tmp' to some other directory. */
if (errno != EXDEV)
{
/* There are many ways this can happen due to a race condition.
When something happens between the initial XSTAT and the
subsequent rename, we can get many different types of errors.
For example, if the destination is initially a non-directory
or non-existent, but it is created as a directory, the rename
fails. If two 'mv' commands try to rename the same file at
about the same time, one will succeed and the other will fail.
If the permissions on the directory containing the source or
destination file are made too restrictive, the rename will
fail. Etc. */
error (0, errno,
_("cannot move %s to %s"),
quote_n (0, src_name), quote_n (1, dst_name));
forget_created (src_sb.st_ino, src_sb.st_dev);
return false;
}
/* The rename attempt has failed. Remove any existing destination
file so that a cross-device 'mv' acts as if it were really using
the rename syscall. Note both src and dst must both be directories
or not, and this is enforced above. Therefore we check the src_mode
and operate on dst_name here as a tighter constraint and also because
src_mode is readily available here. */
if ((S_ISDIR (src_mode) ? rmdir (dst_name) : unlink (dst_name)) != 0
&& errno != ENOENT)
{
error (0, errno,
_("inter-device move failed: %s to %s; unable to remove target"),
quote_n (0, src_name), quote_n (1, dst_name));
forget_created (src_sb.st_ino, src_sb.st_dev);
return false;
}
new_dst = true;
}
/* If the ownership might change, or if it is a directory (whose
special mode bits may change after the directory is created),
omit some permissions at first, so unauthorized users cannot nip
in before the file is ready. */
dst_mode_bits = (x->set_mode ? x->mode : src_mode) & CHMOD_MODE_BITS;
omitted_permissions =
(dst_mode_bits
& (x->preserve_ownership ? S_IRWXG | S_IRWXO
: S_ISDIR (src_mode) ? S_IWGRP | S_IWOTH
: 0));
delayed_ok = true;
/* If required, set the default security context for new files.
Also for existing files this is used as a reference
when copying the context with --preserve=context.
FIXME: Do we need to consider dst_mode_bits here? */
if (! set_process_security_ctx (src_name, dst_name, src_mode, new_dst, x))
return false;
if (S_ISDIR (src_mode))
{
struct dir_list *dir;
/* If this directory has been copied before during the
recursion, there is a symbolic link to an ancestor
directory of the symbolic link. It is impossible to
continue to copy this, unless we've got an infinite disk. */
if (is_ancestor (&src_sb, ancestors))
{
error (0, 0, _("cannot copy cyclic symbolic link %s"),
quote (src_name));
goto un_backup;
}
/* Insert the current directory in the list of parents. */
dir = alloca (sizeof *dir);
dir->parent = ancestors;
dir->ino = src_sb.st_ino;
dir->dev = src_sb.st_dev;
if (new_dst || !S_ISDIR (dst_sb.st_mode))
{
/* POSIX says mkdir's behavior is implementation-defined when
(src_mode & ~S_IRWXUGO) != 0. However, common practice is
to ask mkdir to copy all the CHMOD_MODE_BITS, letting mkdir
decide what to do with S_ISUID | S_ISGID | S_ISVTX. */
if (mkdir (dst_name, dst_mode_bits & ~omitted_permissions) != 0)
{
error (0, errno, _("cannot create directory %s"),
quote (dst_name));
goto un_backup;
}
/* We need search and write permissions to the new directory
for writing the directory's contents. Check if these
permissions are there. */
if (lstat (dst_name, &dst_sb) != 0)
{
error (0, errno, _("cannot stat %s"), quote (dst_name));
goto un_backup;
}
else if ((dst_sb.st_mode & S_IRWXU) != S_IRWXU)
{
/* Make the new directory searchable and writable. */
dst_mode = dst_sb.st_mode;
restore_dst_mode = true;
if (lchmod (dst_name, dst_mode | S_IRWXU) != 0)
{
error (0, errno, _("setting permissions for %s"),
quote (dst_name));
goto un_backup;
}
}
/* Record the created directory's inode and device numbers into
the search structure, so that we can avoid copying it again.
Do this only for the first directory that is created for each
source command line argument. */
if (!*first_dir_created_per_command_line_arg)
{
remember_copied (dst_name, dst_sb.st_ino, dst_sb.st_dev);
*first_dir_created_per_command_line_arg = true;
}
if (x->verbose)
emit_verbose (src_name, dst_name, NULL);
}
else
{
omitted_permissions = 0;
/* For directories, the process global context could be reset for
descendents, so use it to set the context for existing dirs here.
This will also give earlier indication of failure to set ctx. */
if (x->set_security_context || x->preserve_security_context)
if (! set_file_security_ctx (dst_name, x->preserve_security_context,
false, x))
{
if (x->require_preserve_context)
goto un_backup;
}
}
/* Decide whether to copy the contents of the directory. */
if (x->one_file_system && parent && parent->st_dev != src_sb.st_dev)
{
/* Here, we are crossing a file system boundary and cp's -x option
is in effect: so don't copy the contents of this directory. */
}
else
{
/* Copy the contents of the directory. Don't just return if
this fails -- otherwise, the failure to read a single file
in a source directory would cause the containing destination
directory not to have owner/perms set properly. */
delayed_ok = copy_dir (src_name, dst_name, new_dst, &src_sb, dir, x,
first_dir_created_per_command_line_arg,
copy_into_self);
}
}
else if (x->symbolic_link)
{
dest_is_symlink = true;
if (*src_name != '/')
{
/* Check that DST_NAME denotes a file in the current directory. */
struct stat dot_sb;
struct stat dst_parent_sb;
char *dst_parent;
bool in_current_dir;
dst_parent = dir_name (dst_name);
in_current_dir = (STREQ (".", dst_parent)
/* If either stat call fails, it's ok not to report
the failure and say dst_name is in the current
directory. Other things will fail later. */
|| stat (".", &dot_sb) != 0
|| stat (dst_parent, &dst_parent_sb) != 0
|| SAME_INODE (dot_sb, dst_parent_sb));
free (dst_parent);
if (! in_current_dir)
{
error (0, 0,
_("%s: can make relative symbolic links only in current directory"),
quote (dst_name));
goto un_backup;
}
}
if (symlink (src_name, dst_name) != 0)
{
error (0, errno, _("cannot create symbolic link %s to %s"),
quote_n (0, dst_name), quote_n (1, src_name));
goto un_backup;
}
}
/* POSIX 2008 states that it is implementation-defined whether
link() on a symlink creates a hard-link to the symlink, or only
to the referent (effectively dereferencing the symlink) (POSIX
2001 required the latter behavior, although many systems provided
the former). Yet cp, invoked with '--link --no-dereference',
should not follow the link. We can approximate the desired
behavior by skipping this hard-link creating block and instead
copying the symlink, via the 'S_ISLNK'- copying code below.
Note gnulib's linkat module, guarantees that the symlink is not
dereferenced. However its emulation currently doesn't maintain
timestamps or ownership so we only call it when we know the
emulation will not be needed. */
else if (x->hard_link
&& !(! CAN_HARDLINK_SYMLINKS && S_ISLNK (src_mode)
&& x->dereference == DEREF_NEVER))
{
if (! create_hard_link (src_name, dst_name, false, false, dereference))
goto un_backup;
}
else if (S_ISREG (src_mode)
|| (x->copy_as_regular && !S_ISLNK (src_mode)))
{
copied_as_regular = true;
/* POSIX says the permission bits of the source file must be
used as the 3rd argument in the open call. Historical
practice passed all the source mode bits to 'open', but the extra
bits were ignored, so it should be the same either way.
This call uses DST_MODE_BITS, not SRC_MODE. These are
normally the same, and the exception (where x->set_mode) is
used only by 'install', which POSIX does not specify and
where DST_MODE_BITS is what's wanted. */
if (! copy_reg (src_name, dst_name, x, dst_mode_bits & S_IRWXUGO,
omitted_permissions, &new_dst, &src_sb))
goto un_backup;
}
else if (S_ISFIFO (src_mode))
{
/* Use mknod, rather than mkfifo, because the former preserves
the special mode bits of a fifo on Solaris 10, while mkfifo
does not. But fall back on mkfifo, because on some BSD systems,
mknod always fails when asked to create a FIFO. */
if (mknod (dst_name, src_mode & ~omitted_permissions, 0) != 0)
if (mkfifo (dst_name, src_mode & ~S_IFIFO & ~omitted_permissions) != 0)
{
error (0, errno, _("cannot create fifo %s"), quote (dst_name));
goto un_backup;
}
}
else if (S_ISBLK (src_mode) || S_ISCHR (src_mode) || S_ISSOCK (src_mode))
{
if (mknod (dst_name, src_mode & ~omitted_permissions, src_sb.st_rdev)
!= 0)
{
error (0, errno, _("cannot create special file %s"),
quote (dst_name));
goto un_backup;
}
}
else if (S_ISLNK (src_mode))
{
char *src_link_val = areadlink_with_size (src_name, src_sb.st_size);
dest_is_symlink = true;
if (src_link_val == NULL)
{
error (0, errno, _("cannot read symbolic link %s"), quote (src_name));
goto un_backup;
}
if (symlink (src_link_val, dst_name) == 0)
free (src_link_val);
else
{
int saved_errno = errno;
bool same_link = false;
if (x->update && !new_dst && S_ISLNK (dst_sb.st_mode)
&& dst_sb.st_size == strlen (src_link_val))
{
/* See if the destination is already the desired symlink.
FIXME: This behavior isn't documented, and seems wrong
in some cases, e.g., if the destination symlink has the
wrong ownership, permissions, or time stamps. */
char *dest_link_val =
areadlink_with_size (dst_name, dst_sb.st_size);
if (dest_link_val && STREQ (dest_link_val, src_link_val))
same_link = true;
free (dest_link_val);
}
free (src_link_val);
if (! same_link)
{
error (0, saved_errno, _("cannot create symbolic link %s"),
quote (dst_name));
goto un_backup;
}
}
if (x->preserve_security_context)
restore_default_fscreatecon_or_die ();
if (x->preserve_ownership)
{
/* Preserve the owner and group of the just-'copied'
symbolic link, if possible. */
if (HAVE_LCHOWN
&& lchown (dst_name, src_sb.st_uid, src_sb.st_gid) != 0
&& ! chown_failure_ok (x))
{
error (0, errno, _("failed to preserve ownership for %s"),
dst_name);
goto un_backup;
}
else
{
/* Can't preserve ownership of symlinks.
FIXME: maybe give a warning or even error for symlinks
in directories with the sticky bit set -- there, not
preserving owner/group is a potential security problem. */
}
}
}
else
{
error (0, 0, _("%s has unknown file type"), quote (src_name));
goto un_backup;
}
/* With -Z or --preserve=context, set the context for existing files.
Note this is done already for copy_reg() for reasons described therein. */
if (!new_dst && !x->copy_as_regular && !S_ISDIR (src_mode)
&& (x->set_security_context || x->preserve_security_context))
{
if (! set_file_security_ctx (dst_name, x->preserve_security_context,
false, x))
{
if (x->require_preserve_context)
goto un_backup;
}
}
if (command_line_arg && x->dest_info)
{
/* Now that the destination file is very likely to exist,
add its info to the set. */
struct stat sb;
if (lstat (dst_name, &sb) == 0)
record_file (x->dest_info, dst_name, &sb);
}
/* If we've just created a hard-link due to cp's --link option,
we're done. */
if (x->hard_link && ! S_ISDIR (src_mode)
&& !(! CAN_HARDLINK_SYMLINKS && S_ISLNK (src_mode)
&& x->dereference == DEREF_NEVER))
return delayed_ok;
if (copied_as_regular)
return delayed_ok;
/* POSIX says that 'cp -p' must restore the following:
- permission bits
- setuid, setgid bits
- owner and group
If it fails to restore any of those, we may give a warning but
the destination must not be removed.
FIXME: implement the above. */
/* Adjust the times (and if possible, ownership) for the copy.
chown turns off set[ug]id bits for non-root,
so do the chmod last. */
if (x->preserve_timestamps)
{
struct timespec timespec[2];
timespec[0] = get_stat_atime (&src_sb);
timespec[1] = get_stat_mtime (&src_sb);
if ((dest_is_symlink
? utimens_symlink (dst_name, timespec)
: utimens (dst_name, timespec))
!= 0)
{
error (0, errno, _("preserving times for %s"), quote (dst_name));
if (x->require_preserve)
return false;
}
}
/* Avoid calling chown if we know it's not necessary. */
if (!dest_is_symlink && x->preserve_ownership
&& (new_dst || !SAME_OWNER_AND_GROUP (src_sb, dst_sb)))
{
switch (set_owner (x, dst_name, -1, &src_sb, new_dst, &dst_sb))
{
case -1:
return false;
case 0:
src_mode &= ~ (S_ISUID | S_ISGID | S_ISVTX);
break;
}
}
/* Set xattrs after ownership as changing owners will clear capabilities. */
if (x->preserve_xattr && ! copy_attr (src_name, -1, dst_name, -1, x)
&& x->require_preserve_xattr)
return false;
/* The operations beyond this point may dereference a symlink. */
if (dest_is_symlink)
return delayed_ok;
set_author (dst_name, -1, &src_sb);
if (x->preserve_mode || x->move_mode)
{
if (copy_acl (src_name, -1, dst_name, -1, src_mode) != 0
&& x->require_preserve)
return false;
}
else if (x->set_mode)
{
if (set_acl (dst_name, -1, x->mode) != 0)
return false;
}
else if (x->explicit_no_preserve_mode)
{
if (set_acl (dst_name, -1, 0777 & ~cached_umask ()) != 0)
return false;
}
else
{
if (omitted_permissions)
{
omitted_permissions &= ~ cached_umask ();
if (omitted_permissions && !restore_dst_mode)
{
/* Permissions were deliberately omitted when the file
was created due to security concerns. See whether
they need to be re-added now. It'd be faster to omit
the lstat, but deducing the current destination mode
is tricky in the presence of implementation-defined
rules for special mode bits. */
if (new_dst && lstat (dst_name, &dst_sb) != 0)
{
error (0, errno, _("cannot stat %s"), quote (dst_name));
return false;
}
dst_mode = dst_sb.st_mode;
if (omitted_permissions & ~dst_mode)
restore_dst_mode = true;
}
}
if (restore_dst_mode)
{
if (lchmod (dst_name, dst_mode | omitted_permissions) != 0)
{
error (0, errno, _("preserving permissions for %s"),
quote (dst_name));
if (x->require_preserve)
return false;
}
}
}
return delayed_ok;
un_backup:
if (x->preserve_security_context)
restore_default_fscreatecon_or_die ();
/* We have failed to create the destination file.
If we've just added a dev/ino entry via the remember_copied
call above (i.e., unless we've just failed to create a hard link),
remove the entry associating the source dev/ino with the
destination file name, so we don't try to 'preserve' a link
to a file we didn't create. */
if (earlier_file == NULL)
forget_created (src_sb.st_ino, src_sb.st_dev);
if (dst_backup)
{
if (rename (dst_backup, dst_name) != 0)
error (0, errno, _("cannot un-backup %s"), quote (dst_name));
else
{
if (x->verbose)
printf (_("%s -> %s (unbackup)\n"),
quote_n (0, dst_backup), quote_n (1, dst_name));
}
}
return false;
}
static bool _GL_ATTRIBUTE_PURE
valid_options (const struct cp_options *co)
{
assert (co != NULL);
assert (VALID_BACKUP_TYPE (co->backup_type));
assert (VALID_SPARSE_MODE (co->sparse_mode));
assert (VALID_REFLINK_MODE (co->reflink_mode));
assert (!(co->hard_link && co->symbolic_link));
assert (!
(co->reflink_mode == REFLINK_ALWAYS
&& co->sparse_mode != SPARSE_AUTO));
return true;
}
/* Copy the file SRC_NAME to the file DST_NAME. The files may be of
any type. NONEXISTENT_DST should be true if the file DST_NAME
is known not to exist (e.g., because its parent directory was just
created); NONEXISTENT_DST should be false if DST_NAME might already
exist. OPTIONS is ... FIXME-describe
Set *COPY_INTO_SELF if SRC_NAME is a parent of (or the
same as) DST_NAME; otherwise, set clear it.
Return true if successful. */
extern bool
copy (char const *src_name, char const *dst_name,
bool nonexistent_dst, const struct cp_options *options,
bool *copy_into_self, bool *rename_succeeded)
{
assert (valid_options (options));
/* Record the file names: they're used in case of error, when copying
a directory into itself. I don't like to make these tools do *any*
extra work in the common case when that work is solely to handle
exceptional cases, but in this case, I don't see a way to derive the
top level source and destination directory names where they're used.
An alternative is to use COPY_INTO_SELF and print the diagnostic
from every caller -- but I don't want to do that. */
top_level_src_name = src_name;
top_level_dst_name = dst_name;
bool first_dir_created_per_command_line_arg = false;
return copy_internal (src_name, dst_name, nonexistent_dst, NULL, NULL,
options, true,
&first_dir_created_per_command_line_arg,
copy_into_self, rename_succeeded);
}
/* Set *X to the default options for a value of type struct cp_options. */
extern void
cp_options_default (struct cp_options *x)
{
memset (x, 0, sizeof *x);
#ifdef PRIV_FILE_CHOWN
{
priv_set_t *pset = priv_allocset ();
if (!pset)
xalloc_die ();
if (getppriv (PRIV_EFFECTIVE, pset) == 0)
{
x->chown_privileges = priv_ismember (pset, PRIV_FILE_CHOWN);
x->owner_privileges = priv_ismember (pset, PRIV_FILE_OWNER);
}
priv_freeset (pset);
}
#else
x->chown_privileges = x->owner_privileges = (geteuid () == ROOT_UID);
#endif
}
/* Return true if it's OK for chown to fail, where errno is
the error number that chown failed with and X is the copying
option set. */
extern bool
chown_failure_ok (struct cp_options const *x)
{
/* If non-root uses -p, it's ok if we can't preserve ownership.
But root probably wants to know, e.g. if NFS disallows it,
or if the target system doesn't support file ownership. */
return ((errno == EPERM || errno == EINVAL) && !x->chown_privileges);
}
/* Similarly, return true if it's OK for chmod and similar operations
to fail, where errno is the error number that chmod failed with and
X is the copying option set. */
static bool
owner_failure_ok (struct cp_options const *x)
{
return ((errno == EPERM || errno == EINVAL) && !x->owner_privileges);
}
/* Return the user's umask, caching the result.
FIXME: If the destination's parent directory has has a default ACL,
some operating systems (e.g., GNU/Linux's "POSIX" ACLs) use that
ACL's mask rather than the process umask. Currently, the callers
of cached_umask incorrectly assume that this situation cannot occur. */
extern mode_t
cached_umask (void)
{
static mode_t mask = (mode_t) -1;
if (mask == (mode_t) -1)
{
mask = umask (0);
umask (mask);
}
return mask;
}